آلومینیوم کامپوزیت یکی از بهترین و خاص ترین نوع از نمای ساختمان است. The facade of the building, which is made with this material, has a special effect and has a reasonable cost. This is why many office buildings and even universities use this type of material in creating facades.
There are various methods for installing aluminum composite, one of which is the rail method. This method has special features that are not seen in other aluminum composite facade installation methods.
Hanging rail method
In this method, the sheets are mounted on special aluminum profiles using built-in grooves. In this case, due to not using screws or rivets, the work speed is high, it is possible to separate and replace each of the parts separately, and due to the use of aluminum stud profiles, there is no need to seal the facade anymore.
In this method, after the implementation of the iron girders to form the infrastructure structure, the iron corners with bean hole characteristics are installed on the girders in accordance with the axes presented in the executive drawings.
In the next step, aluminum rail studs with a specific cross-section are connected to the substructure by aluminum brackets with two bean holes in the axis of the iron corners. In this method, like the fixed aluminum method, rubber is used between the aluminum lamella and the iron corner to prevent corrosion between iron and aluminum.
Composite sheets are installed on the lamellas by means of aluminum joints in the form of studs (studs) that are inside the aluminum lamellas. The method of connecting the sheet to the studs is performed in different ways, which causes differences in the methods of the regiment, among which we can refer to the hook system. did
The steps of implementing infrastructure in the rail method (Hanging)
The steps of implementing infrastructure in the rail method (Hanging)
Welding metal cans
Installation of metal bracket
Aluminum corner installation
Installation of rail studs
Bolt stud installation
Grooving and sheet cutting
Sheet bending and assembly
Installation and stabilization of the sheet
Of course, there are other methods, but this method has been and continues to be the focus of building facade installers due to its advantages and improvements.
